PRIME Primer - Interior/Exterior

Gave me a smooth, even base on patched drywall and bare wood. The finish paint went on clean and consistent.

Worked great on interior drywall, but in a colder room it took longer to dry between coats. Once dry, the topcoat looked perfect.

Rolled it on, let it dry, painted. No issues.

For the price, this primer performs really well. Consistent coverage and strong adhesion on both old and new surfaces.

Painted a block wall in the garage. PRIME helped seal the pores and the paint stopped soaking in.

Used one product for walls and trim priming. Smooth finish, good adhesion, and my final coats leveled out nicely.

New drywall can drink paint—PRIME sealed it so my first finish coat didn’t get patchy.

After priming, my topcoat covered noticeably better. I think it saved me time and paint on a big room.

Primed an aluminum door kick plate (cleaned well). The paint stuck and hasn’t chipped so far.

Two coats of paint over PRIME and the walls look like a pro did them. It really helped hide old scuffs and patchwork.

Great primer with strong adhesion. There’s a normal wet-paint smell while applying, but it cleared out quickly with a fan. Left a smooth base for the topcoat.

Primed a small stucco section before repainting. Adhesion was strong and the topcoat didn’t soak in unevenly.

It rolled out evenly and didn’t drag. Left a consistent white base that made color matching easier.

One project had drywall, wood, and a bit of masonry. PRIME handled the transitions nicely so everything painted the same.

Used on an older bathroom wall (after cleaning). No lifting or bubbling and the new paint bonded well.

I’m picky about finishes—PRIME made the wall look more uniform so the final coat didn’t highlight roller marks.

Adhesion is great and it lays down smooth, but it felt a little thin on very porous areas. I ended up doing two coats there.

Had a few light water marks near a window. PRIME reduced the discoloration and the paint covered cleanly.

I had lots of small patch spots. One coat of PRIME and everything blended in under the topcoat.

Old plaster can be tricky, but this sealed it well. I didn’t get any weird texture changes once I painted.

Went over a previously painted bedroom (washed and sanded). PRIME improved adhesion and the new color looks consistent.

Straightforward primer. Covered well on drywall and gave me a clean base for two coats of paint.

Primed bare concrete in the basement before painting. It tightened up the surface and the finish coat went on much nicer.

Used it on composite panels for a mudroom project. Paint stuck great and the surface looked sealed instead of thirsty.

Rolled on smoothly and didn’t splatter much. Cleanup was easy and it left a nice, even film.

Primed a living room with mixed old paint and new repairs. PRIME made the wall uniform so the satin topcoat didn’t look blotchy.

Applied to a galvanized vent cover after cleaning and a light scuff. PRIME bonded well and the topcoat has held up without chipping so far.

Perfect for sealing joint compound and spackle patches. No dull spots after painting, which is what I was fighting before.

PRIME left a smooth, consistent surface on my hallway walls. The finish paint covered in fewer passes and looked more even.

Brushed it on exterior wood fascia and it held up great under paint. Dry time was a bit longer on a humid day, but the finish came out smooth and well-bonded.

Did drywall and some wood trim in one go. It performed well, but on raw wood I needed a second coat to fully even out absorption.

We primed over previously painted plaster (light sanding first) and PRIME grabbed great. No peeling at tape edges and the room looks cleaner and brighter under the topcoat.

Really happy with the coverage, but you *have* to stir it well—mine was a little separated. After mixing, it rolled smooth and helped the finish coat look uniform.

Used PRIME on fresh drywall and patched areas. It leveled the texture nicely and my topcoat went on evenly without flashing. Adhesion feels solid after a week.

I used Kompozit PRIME on both new drywall and some patched-up areas, and it made everything look like one smooth surface. The topcoat went on like butter — no flashing or weird texture. Definitely using it again on my next project.