Kompozit

Rust converter KRAKEN "Kompozit", spray 250 ml (8.45 fl oz)

No reviews No reviews
 
$19.00
 
Ready-to-use safe and reliable product based on natural plant raw materials. Odorless, free from organic solvents and toxic substances. Well absorbed into the pores of dense rust layers ranging from 50 to 300 µm, transforming them into a durable protective layer of complex ferrous compounds. Levels the affected surface and protects it from further corrosion, improves adhesion and the quality of protective paint coatings.
Recommended uses:

It is intended for preparation of ferrous metal surfaces, in particular not easily accessible, including reinforcement of ferro-concrete, building steel constructions, bridges, mine bar- ring; land and sea vehicles, industrial equipment, pipelines and tanks (incl. those with drinking water) before applying of anticorrosive protecting coatings.

TECHNICAL DATA

Spreading rate, m2/l 8 – 12 (application rate 0,08 – 0,125 l/m2; 2 – 3 m2 per 250 ml).
Appearance Opaque brown liquid, slight sediment is possible.
Density, kg/l 1,03 (ISO 758).
Storage Store and transport in the original sealed container at the temperature from +5 to +35 °С. Keep away from children, heating and direct sunlight, do not allow freezing.
Shelf life is 24 months from the date of manufacture.
Packaging 250 ml (spray).

 

APPLICATION INSTRUCTION

 Surface preparation:

Clean the surface from old exfoliating coatings, traces of oil, dust and other contaminants. If neces- sary, use paint strippers according to the application instructions. Solvent Kompozit® is recom- mended for degreasing. Remove layers of brittle and exfoliated rust and scale using a scraper, metal brush, special nozzles, abrasive blast cleaning, or another convenient method.

Treatment:

Mix the product thoroughly before application. Apply to the metal surface as a continuous even layer without omissions and skips using the sprayer. Application is possible at a temperature from +5 to +35 °C, but the most recommended temperature is from +15 to +20 °C, at which the rust conversion process lasts up to 2 hours, indicated by the change in the surface color to dark blue. If the rust layer is more than 150 micrometers thick, after the process is completed, some unconverted areas may still remain, so it is recommended to repeat the treatment. Do not allow the formation of excess converter on the horizontal surfaces, if necessary, remove them with a damp sponge or cloth. Apply on vertical surfaces from bottom to top. After the converter has dried, do not wash it off with water, if there are dusty conversion products present on the surface, remove them with a brush or cloth. It is desirable to prime and paint immediately after the converter will dry up (no later than 1 – 2 days); before applying the protective paint coating, the treated surface should be protected from atmos- pheric precipitation and moisture.

SAFETY:

WARNING. H302: Harmful if swallowed. H312: Harmful in contact with skin. H319: Causes serious eye irritation. Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling. Do not breathe spray or mist. Use a respirator and safety glasses while spraying. Use personal protective clothes and rubber gloves (leaves staining that is difficult to remove).
In case of accidental ingestion seek for medical advice immediately.

ENVIRONMENTAL PROTECTION:

Do not empty into drains, water system or soil. Liquid leftovers are to be disposed according to a local/national regulation. Empty containers are utilized as a recyclable plastic, don’t reuse it.